Life Safety Systems
True life safety systems are more than just a few smoke alarms -- a lot more.
Tasco's design philosophy, based on decades of experience and taking advantage of state-of-the art technology, addresses life safety in the home and business comprehensively, seamlessly, and proactively to assure our clients that they will be secure in the event the unthinkable occurs.
Fire Detection Systems
We design our residential fire alarm systems to meet NFPA 72 and Life safety 101 Codes. These are the codes that are used in most new home construction and meet insurance company requirements.
The codes require smoke detection on each level of the home, within fifteen feet of an entry to a sleeping area, and in each bedroom. We also install rate-of-rise sensors in the areas that have the highest propensity for fire to start (kitchen and furnace). These devices detect a rapid change in temperature, but not smoke. This allows for the optimum detection while reducing the chances of false alarms. The final level of detection is provided from fixed heat sensors that are installed in attached garages, attic spaces, and storage areas.
Commercial fire alarms are design to meet all codes required by the local jurisdiction having authority.
Gas Detection Systems
Tasco Security provides Carbon Monoxide, propane gas, and natural gas detection devices.
Carbon monoxide sensors are typically installed on each level of the home and in each sleeping area. These devices will detect the presence of CO. Carbon monoxide gas is produced from incomplete combustion from any fuel source, your furnace, fireplace, woodstove, or gas appliance. CO is a silent and deadly killer, it has no color or smell. As heating systems and building insulation become more efficient the risk of CO being produced is increased.
Propane (lp) and natural gas sensors are installed six feet from any natural gas source or appliance. These devices will detect the presence of gas within the structure. Unlike CO, these gasses do have an odor to them, yet they pose a unique risk in that a catastrophic explosion can occur if they go unchecked.
Tasco Security installs state of the art control systems that are easy to use; yet provide a powerful level of security functions. These systems can be partitioned so that you can arm and disarm different areas of the building (or buildings) independently of one another. Modules can be added to control lighting and appliances, allow for access via touch-tone telephone, and remotely turn your heat up or down. These systems are intuitive and easy to use, thus reducing unwanted alarms.
